BP6.Com

it is hot, but it's supposed to run on 33MHz...that is not too much heat for the chipset...but you can cool it if you use heatsink...although it's not important if you don't overclock the chipset...and the normal PCI chipset go to 37,5MHz without a probelm for the most of the cards or chipsets! also...

somewhere on this page was the link that showed the comparisson...and the 4xOpteron 1,8GHz was the fastest computer for SETI crunching!

if the disabling the USB card gets you faster, did you consider that the PSU is better supllying the MBO & the whole system, and that is why they are working faster!?! also, you might check that by installing brand new PSU with 400 or 450 or even 500W on the BP6 machines... :D if it works, that is t...

Dave Rave wrote:until you buy a real P4 with HT, worth it for the extra crunch

yeah, but the Opterons & Athlons work better than P4s!!!

the PCI USB adapters are tricky to have on BP6 board...that was mentioned earlier, so sniff around more and you'll find it...i have to go to bed now, it's 2AM here...good luck in your search here... did you try the ALi PCI USB 2.0 3+1 port, i use that on BP& system...also on the box there is some U-...

here are some of the FACTS from the web site forum.grid.org: UD - Jeff Lawson wrote: I just thought I'd point out a few things that may be clear to some of you but not others. None of this is intended to be an official statement from United Devices, but all of this should be self-evident from the in...

has anyone been to Las Vegas 2006 show?! is the laptop real?!

Maybe before you start quoting the law to me you might try learning to write in English. Oh yea getting a clue might help too! Billl well sorry if the English is bad...but the law seem to be the same in all modern democratic countries...nor the bad english, nor the things people think mathers! only...

in fact, that is true and it's not true... 'cause they have developed the UD Grid MP and all the software for clusters and the UD agent, which was all selled as a product to WCG (http://www.worldcommunitygrid.org/)... and when you look at all the projects done with UD agent: Statistics By Project Pr...

There is a version that just runs on a floppy drive. Not sure what the name is. Just do a search. A floppy would be as quiet as a USB drive. Billl floppy drive is not so quiet as the memory stck can be...practicly floppy is sometimes even noiseier than the HDD... and a memory stick is as quiet as a...

why are you so opsessed with the explosions?! next on this site we are going to see: look someone tried to make a phonecall, and the damn thing blew up!

no, wait, that already happend...
but you get the idea!

Billl wrote:I don't run UD for one simple reason. I'm not giving away my resouces so they can make money off of me.


Billl

UD or BOINC are the same thing...both are for educational perpouses only and with cooperation of the universities...so that makes your remark silly!!

don't you think I've tried that, before coming here?! they only have normal soldering iron (SI)...and when i ask for microSI they just don't know where to get it, where to buy it and they don't have it...

so now, I'm trying to find it on internet!!!


what do you use for soldering on your MBO?!

anyone wanna join the group?! here is a link ... :idea: current projects are: 1.) Human Proteome Folding Project - in collaboration with the Institute for Systems Biology, the University of Washington, and IBM Corporation. (crunching together with WCG & BOINC on this project) 2.) United Devices Canc...

here is another pic of the most current results...in them, i've overclocked my CPUs 533@576 with FSB on 72MHz...the difference in great...and now newer results are here!

here is another pic of the most current results...in them, i've overclocked my CPUs 533@576 with FSB on 72MHz...the difference in great...and now newer results are here!

where could i get or order a micro Soldering iron for the MBO...i got one, but that is too big for the MBO...and have to do some work on it!

has anyone got any idea?!

as a Mechanical engineer, I do think it's the stupidest thing to do...on -100degC CPUs maybe work...but for sure, you have to turn them ON on normal temp...and then lower the temp gradually, not to have termal shock in component! also, the MBO is the another problem, 'cause the operationg condition ...

No, 'cause my caps are 1500microF@16V...

And in my opinion you better use higher voltage caps than lower!
After all, it would be a waste to frie that board, if they start to leak...and thet might happen!

recently i got on the UD homepage and searched a little...and found out there is a BP6 group made there...so I joined, and I'm trying to get to the position of the captain of the group, so I can post link for this page on that group! it would be nice to have a group over there for ongoing projects! ...

in BIOS under the APCI option enable, there are other options...I think i saw there sthg about the FANs to keep them running if the computer is OFF!!!

why don't you check...in many BIOSes there are these kind of options...

like i said, you can run DOS apps, but with the hack in WinXP...in oder to do so, you must configure SP2 to run the 8 & 16-bit apps... so check these sites: http://support.microsoft.com/default.aspx?scid=kb;EN-US;314106 http://support.microsoft.com/kb/142026/ or this: http://dosbox.sourceforge.net/n...

the system froze during the boot...no HDD led, no nothing...so i think it's sthg more than PCI card or AGP card...maybe i do need active cooling on BX chipset for 600MHz?!

So far, I've had no problems with SP2, exept one: the firewall on SP2 is good, but some time ago someone hacked into computer and used it for a spam server...100MB over the night...from that day i installed ZoneAlarm Firewall, which also has Spyware search inside & Antivirus (which is desabled)...an...

had to dump it back to 576MHz, but it's stable now...600 is still over the limit...but only for now!