BP6.Com

Hmm, this board looks like a via-rhine based board.
modprobe via-rhine doesnt work?

kuun:
I don't have any P4 motherboard, nor DDR/Rambus memory laying around, so I did the mod in my main machine

RRLedford:
Hi! Have you tried the FX5200 in your BP6 without problems? FX5200 specs says that AGP is 8X, it seems to be incompatible with the BP6 2x AGP specs ...
I'm searching for a new video board for me

No beep means no post, the machine isn't booting. A PCI video board does not help so much

Harker: a Creative Labs GeForce2 MX DDR.
The BP6 boots? Can you hear the beepr? In my case, the problem is probably the AGP clock . I need to try with a PCI video board

I bought my Powerleap without cooler. I'm using a Globalwin FEP32 (I have a pair) which I used when my machine was a dual 366@550.

Nicklogan: What you used? 2 "lin-lin" adapters?
I'm thinking about put a Tualeron in another BP6, only using 2 "lin-lin" adapters, because Neo is very expensive.

Harker: My processor is OEM, I cannot locate info about it in intel's site either, but in google I found references for it: http://www.intel.com/design/celeron/specupdt/24374847.pdf I have only one processor, I used the same in the two boards, but I'm thinking about buying another one to solve this ...

xrebycse: I have a 1.4GHz celeron tualatin, and I'm using it overclocked at 1540MHz, with a 110MHz bus. I'm not using 133Mhz, because my video board don't boot at this clock. Only my Neo is jumpered to 133MHz. harker: yes, I have no mods in my BP6, only a fan attached to the chipset heatsink :) Perh...

xrebycse: the settings are for "lin-lin" adapter. Powerleap Neo s370 only have 2 dip switches.

Harker: maybe this one will help you:

http://miurasan.dyndns.org:8080/tualati ... n-004.html

Harker: Maybe the problem is the jumpers on the top adapters? And my neo is jumped for a 133MHz bus.

The modification worked without problems with the BP6 stock BIOS , it detected the correct voltage without problems.
Harker, my "Lin Lin" adapter is jumped as "old intel motherboard" (I don't remember which jumpers were now).

The BP6 with an old BIOS (the one which comes with the board) reports something similar to a "=98" for processor speed. But the voltage is detected as 1.5v normally.

I buyed mine at ebay, because I can't found these adapters in Brazil

I think it works, mine is revision 1.0 too

I have uploaded some Sandra benchmarks screenshots in my picture gallery. I don't have idea of what benchmarks to do (because I use mainly linux). Suggestions are welcome

I don't know if it will work, I used the neo s370 because I'm had one previously to use coppermines in my BP6. I bought this tualatin adapter to use in another motherboard (FIC FBII), but unfortunatelly it burned out, so finally tried the adaptor in the BP6

I have just uploaded an wcpuid screenshot into my personal library.

As Derek said, the number of bogomips doesn't indicate the performance of the machine, but just in case, actually my machine is showing about 3073.63 bogomips. My BP6 with 2 celerons 366@550 showed about 2200 bogomips. Just to compare, with 2 celerons at 550, the conversion of an DivX to MPEG using ...

Well, I can't go highter than 14*110=1540MHz.
At 124 the system aparently posts, but no video. Already tried to change the video board to a Radeon 9000, but without success

HAL6000 wrote:Do we know who makes these? If the are good for SMP? Also can you stack two of them instead of using the powerleap adaptor?

I wouldn't mind have dual 1.4's in my webserver

You can find these adaptors at www.evertek.com, although I have found mine at Ebay.

Hi!

Derek, I will install Windows in my machine in this weekend (actually I'm running only Linux). What kind of benchmark program do you suggest?

Pictures uploaded to Personal Gallery:
http://www.bp6.com/board/album_personal ... er_id=1651

Thank you!

RRLedford, I'm using the settings listed as "old intel chipset" (jumpers on A5/A6 and B8/B9).
My BP6 doesn't have any mods installed and I'm running in single mode only, because tualatin celerons doesn't allow SMP.
I don't know if it's possible to run a dual P3 tualatin on a BP6.