BP6.Com

Well, i ran prime95 as a stability test for several hours at 366/2.0V before installing and it was very stable and without problems at 37, 32, 34 degrees celsius (mainboard, cpu1, cpu2). the machine rebooted without any problems and i went to the installation. and then ... after the next reboot the ...

Hello boardmates, finally i had finished the hardware setup of my BP6 with two Celoron 366 and everything was fine with Roby 2 BIOS (HPT 1.28). Windows 2000 worked just fine at 366/2.0V or 550/2.1V. Now I went to the last step and installed Solaris 9 on my second HD. After the installation process t...

Yes, that's what I thought too, yesterday I changed Sockets and the problem moved with the one CPU, so I know that this one is definetly broken. When looking for some new ones (I'm going to buy a new pair, to be sure to have real twins) I found these Celeron 366's with SL36C Stepping, these are said...

Yes, that's what I thought too, yesterday I changed Sockets and the problem moved with the one CPU, so I know that this one is definetly broken. When looking for some new ones (I'm going to buy a new pair, to be sure to have real twins) I found these Celeron 366's with SL36C Stepping, these are said...

Hello to davd_bob, thanks for your reply. As I expected, unfortunately my problem is not caused by any CMOS-settings, I tried the way you described, but no success. I'm also not sure where the L2-Cache is situated, on DIE or on Board. I think there is a Error Beep Code for broken L2 too. But POST pa...

The last days I flashed my BIOS several times, in order to get Solaris 9 x86 installed on my BP6 with 2 Celeron-A (Mendocino) 500MHz. Suddenly after one flash-process, the machine showed strange behaviour like not switching the monitor on when power-on and not printing the messages it used to print ...