BP6.Com

also a great thing about Opera is downloading mails and browsing around...also news groups can be downloaded...contacts in mail are nicely done & with their mails, with fast cache of the mail!!! :D printing within browser is great & when something is selected, printing will automaticlly be set to SE...

well i also have ALI PCI USB2.0 4+1 adapter...it's a pretty good adapter, and works fine on BP6 (no IRQ problems, like some others!!)... :D :D in mine Device Manager it also is scripted like that...an overlay device, which works fine... with mine 512MB USB FLASH it sees USB2.0 and work great...so it...

well it's nice to have someone older and wiser here... :D :D :D although we are generally youger...we all hope that our youth and enthusiasm gives you sthg to push everyday with...it's nice to have this page to get away from everyday stress... :lol: :lol: :lol: also if it werent for this page i coul...

post some pics...just to see how it worked out... the voltage on the caps doesn't mather...the 10V are a little harder to charge, but that is inconsiderable...the 15V might work, but 20 or 30V hardly!!! all that mathers is the capacity of the caps that should be equal to the ones you have had earlie...

hany321 wrote:hi all
in some cases you need to replace your hard disk mother board
when to replace this board and how ???
please reply
Thanks

so what is your HDD?!
i've done sucha thing, but you must have the exact same HDD to do that!!!

then you have to put the BP6 BIOS with RAID HPT366 BIOS...did you find it somewhere?! i think there is one verson on BP6, but guys running that weren't so happy...

Thrakath, you are better of with the new ones! go to the shop and get 1500µF capacitors...can be the bigger ones withz 10V, no diiference! :D :D they don't cost much, sthg like 10cents a peice... replace all the bulging ones, and all that haven't got round belly (either inside or outside) & twist to...

both CPUs shopuld work on your BP6...might be that the CPU socket 0 doesn't work...so it might me that you have flaud board!!

both CPUs are allways on...please inspect your BP6 for any scrathes or mechanical problems...also contact the guy who sold you the faulty exipment?!

I want to feed the cold water to a holding tank where it mixes, so that it is cool water, which is fed into each boxes local water supply. so each box can be independent, but can be piped into active colder cooling too well you can allways take your water pipelines through your reservoir...and when...

I have 6 fans, and i have massive Alpha CPU heatsinks pasted with arctic silver 5. My case moves air like a furnace! Also, my BP6 lives in my basement computer room which is abnormally cold. than the basement must be it...'cause mine are about 40-50°C in my room...of course, they are computing on g...

awsome!

how did you get those low temps?!

well maybe the USB is your problem?! some users here complain about loosing USB with OC systems...


Spock: "But captain, I must warn you that warp 4.5 is the top speed for this vessel!"

congradulation on HPF project stage1 complete!!!

for me it way a special moment on the Opening of the Games when they brought a brand new 248 for the 2006. season...the sound of buzzing V8...reving and slowly comming to the front of the stage...
i really got the goose-bumps all over my body!!!

seems like you hit the wall with that LAN or MODEM card you got...it might not be the IE...did you try to install Opera or Firefox, adn try to connect with them on Internet?! also, try to use ICQ, MSN or some other internet program...just to rule out the card problem!!! "find a way to give me more p...

purrkur, I think you are right...i did a little search on this old link and most of the boards had identical IDE ports...

must be some strage motherboards i was working on, that had not only different color of the IDE ports, but also different speeds supported on them...sorry!

two fixes: 1. might work for USB port, in BIOS go to CHIPSET FEATURES SETUP and ENABLE the PASSIVE RELEASE...that should fix some problems with the PCI cards going off... 2. for PS/2 stability go in BIOS to PNP/PCI CONFIGURATION set RESOURCES CONTROLLED BY on MANUAL and IRQ-12 set on LEGACY ISA!!! a...

I'd love a dual water cooling system. semi-super cooling system to keep the fish-tank reservoir at a nice even 15 degrees. then I'd clock my BP6's to the max, 78-80 fsb no prob cooling pipes on northbridge, cpus, vga, anything I'd get a water pipe to sit on. it's just that the boxen would be so hea...

Davd Rave, If they would have used your design at "Three Mile Island" nuclear plant they could have prevented the melt down. Also I want to try that design on a laptop. Tell me how to do it. well a 3mile island is a nice experiment...just to see how much the americans could push their nucs! :D afte...

Come on guys, where is your sense of adventure? Whatever happened to messing about just for shits 'n giggles? I say that if he has the money, time and equipment to mess about, even though it may not make sense to everybody else then I'd say go ahead! I love reading about wacky stuff like that! a gu...

well the USB for some unexplained reason is very likely to go off when overclocking...though i don't know why, 'cause you are on the 33MHz PCI! there might be a heat issue... there is some fix in the BIOS for the PS/2 port...but i cannot find it right now...try to browse a little on the forum and it...

This isn't true. My DVD player for instance has an ATA/ATAPI-5 interface which translates into Ultra DMA66. So you are wrong when you generalize and say that no optical drivers work with interfaces other than regular ATA33. well, yeah, your DVD is ATA66...but most of the others aren't! in general, ...

Dave Rave wrote:72fsb is only 576mhz
75 gives you 600
you didn't mention what voltage you are running the cpus at. at least 2.10v I'd say
much voltage and OC'ing needs much cooling.

check my signature!

yes, i did multiply wrong...but later i did corrected it...i don't want to edit it just yet!

thing is that i need a new PSU, 'cause this one hasn't got the intake under it...so it would cool down the CPU 1 & 2...i'll post some of the temps. when i got that...now they are about 40-45°C, for all 3 sensors!!! :D but UD Agent is running and cruching DATA for http://www.grid.org ! the paste is o...

no CD, CDRW, DVD or DVDRW doesn't work on ATA66/100/133...so that is your problem solution...they only work on ATA33!!

also on most of the boards, CDs & DVDs are sugested to contected on secondary IDE port, 0cause that port is only ATA33!!!