Search found 301 matches
- Sat Nov 30, 2002 7:53 am
- Forum: Overclocking / CPU Database
- Topic: HELP! my BP6 has lost it's mind!
- Replies: 3
- Views: 4184
BP6 settings
Well, I tried the battery, it checked out ok. Then, things really got wierd! All of my registry settings became "invalid"(size of files reported as wrong). When I tried to correct using scandisk it duplicated all registry settings and filled up my "C" drive! My guess is a virus of some sort although...
- Wed Nov 27, 2002 7:50 pm
- Forum: Overclocking / CPU Database
- Topic: HELP! my BP6 has lost it's mind!
- Replies: 3
- Views: 4184
HELP! my BP6 has lost it's mind!
It all started yeasterday when I first booted up. My PC could not "see" the "C" drive, listed it as a "PO1" instead of a UDMA4. I reset it in the "Soft-BIOS" and went on my way. Now today it won't retain any settings in the soft BIOS even after reset, save and soft-boot. Could this be the result of ...
- Sat Nov 23, 2002 12:33 pm
- Forum: Overclocking / CPU Database
- Topic: 1.1Ghz Coppermine with NEO-S370 Adapter
- Replies: 44
- Views: 41580
PIII's and NEO S370's
Well, I FINALLY have my system up and running, stable, 1 PIII on NEO S370 in socket closest to the RAM sticks, and THAT was part of my problem! If you are using the stock NEO heatsinks(which, by the way, I don't advise), when mounted on the CPU in the socket closest to the RAM in slot one there is a...
- Sun Nov 03, 2002 11:23 pm
- Forum: Overclocking / CPU Database
- Topic: 1.1Ghz Coppermine with NEO-S370 Adapter
- Replies: 44
- Views: 41580
continuing problems
I have now gone through a complete reload of both 98SE and NT4.0. Heat caused my system to become unstable and corrupted windowz files. WORD OF WARNING! Make dam sure you have good heatsinks and fan(s) on the PIII's! The stock NEO's are marginal to say the least and if you don't get them sitting squ...
- Tue Oct 29, 2002 10:18 pm
- Forum: Overclocking / CPU Database
- Topic: 1.1Ghz Coppermine with NEO-S370 Adapter
- Replies: 44
- Views: 41580
Problem solved!
It seems that when I went to 124 my BX chip set got a little warm to say the least!(you should see blister on index finger :( ). I do have a fan on the "greenie" and thermal paste but I can see that that is not enough. Anyway, after I shut down and let it cool down I rebooted and all is ok(I dearly ...
- Mon Oct 28, 2002 11:28 pm
- Forum: Overclocking / CPU Database
- Topic: 1.1Ghz Coppermine with NEO-S370 Adapter
- Replies: 44
- Views: 41580
Help!
Well, I got greedy, tried for 124mhz now no video!
Is it possible that I damaged my G400 by trying to go to 124?
Please advise!
Is it possible that I damaged my G400 by trying to go to 124?
Please advise!
- Mon Oct 28, 2002 11:05 pm
- Forum: Overclocking / CPU Database
- Topic: 1.1Ghz Coppermine with NEO-S370 Adapter
- Replies: 44
- Views: 41580
PIII 1100E upgrade
Well, here I am in never-never land! Just completed conversion to 1, 1100E PIII CPU on my BP6! Haven't had much of a chance to document all that has happened yet, however, lots of interesting and strange things have happened so far! As we speak ;), I am at 110Mhz with 1, 1100E in socket closest to R...
- Thu Oct 24, 2002 9:43 pm
- Forum: General Discussion
- Topic: What works with the BP6?
- Replies: 1
- Views: 2536
What works with the BP6?
I haven't published to much as to the BP6, however, I have just made a bios change that has made a big diffrence in FSB! Here is what was current on one of my systems and what I changed! OLD SYSTEM WIN98SE/NT4.0 SP6 Abit NJ BIOS HPPT366 1.22 BIOS, 1.21 drivers BP6, 1.0, .40(a very early board?) 512 ...
- Sat Oct 19, 2002 9:13 am
- Forum: Off Topic
- Topic: And on a lighter note
- Replies: 7
- Views: 8419
football
Ok, this may only appeal to "locals"(Wisconsin) slagathor :) Why doesn't Rockford Illinois have a professional football team? Because then Chicago would want one to! What does the Tal-ebon("scuz splnk ;) ) have that the Chicago Bears don't? A running game! How do you keep bears out of your yard? Put...
- Wed Oct 16, 2002 8:44 pm
- Forum: General Discussion
- Topic: Sound card problems
- Replies: 4
- Views: 5153
Sound card problems
First of all I would like to say it's not so much the card as it is in understanding how it works on the BP6. Number 1, Creative cards are IRQ hogs, do you know that some use more than one IRQ? My Platinum used IRQ10 and 5 until I disabled the DOS simulation(yah, it's still there!) Also, they don't ...
- Sun Oct 13, 2002 10:19 pm
- Forum: General Discussion
- Topic: building new system on abit bp6
- Replies: 9
- Views: 4952
RAM requirements for BP6
If this is 512 on one stick you are out of luck BP6 will only work with a
max of 256 per slot or a total of 768 meg of ram per ABIT.
max of 256 per slot or a total of 768 meg of ram per ABIT.
- Fri Oct 11, 2002 11:57 am
- Forum: General Discussion
- Topic: creative
- Replies: 0
- Views: 4124
creative
Creative Platinum(original) with Live Drive and Cambridge 2500 Surround
Sound 5.1 system
Sound 5.1 system
- Fri Oct 11, 2002 6:23 am
- Forum: General Discussion
- Topic: BP6FSB Killed my board!
- Replies: 2
- Views: 3155
to much ram?
I don't know if it has anything to do with it and I'm sure you aleady know this but BP6 can only support a max of 256 meg of ram per slot or a total of 768. Could the additional ram be causing a problem?
Just a thought
Regards,
jaybird
Just a thought
Regards,
jaybird
- Mon Sep 30, 2002 8:02 pm
- Forum: Overclocking / CPU Database
- Topic: 1.1Ghz Coppermine with NEO-S370 Adapter
- Replies: 44
- Views: 41580
PIII 1100E & NEO370S
SMP is not enabled on the standard 370S. Check this sites index for required modifications.
Regards,
jaybird
Regards,
jaybird
- Mon Sep 16, 2002 9:23 pm
- Forum: Overclocking / CPU Database
- Topic: Whats the fastest SMP chips i can put on my BP6?
- Replies: 4
- Views: 5522
1100E and 1000E cpu's
According to Intel they only made 1100ES's (OEM chips only!)that are at 100Mhz FSB, the 1000E's are actually 1000EB's that are 133 FSB only, but again, regardless of stepping, ALL PIII's were/are SMP enabled!
- Mon Sep 16, 2002 9:15 pm
- Forum: General Discussion
- Topic: Question 366 or 533 celery stalk?
- Replies: 11
- Views: 10439
PIII "s smp?
To the best of my knowledge ALL PIII 's are SMP enabled! However, the BX chip set is very heavely taxed when asked to run SMP at or above 100Mhz. Believe me I know! Once when trying to run my 366's at 110Mhz(605Mhz) I touched my BX chip set(with out extra cooling at the time) and promptly produced a...
- Mon Sep 09, 2002 9:10 am
- Forum: Overclocking / CPU Database
- Topic: Put a fan to your chipset...
- Replies: 20
- Views: 15094
BX chipset cooling
Has anyone tried a TEC on the BX chip set? I'v read that it does wonders with other chip sets when overclocking.
Regards,
jaybird
Regards,
jaybird
- Sun Sep 01, 2002 7:30 am
- Forum: Overclocking / CPU Database
- Topic: 1.1Ghz Coppermine with NEO-S370 Adapter
- Replies: 44
- Views: 41580
Dual PIII 1.1Ghz cpu's
Would you mind sharing with us where you are getting your 1.1Ghz cpu's from? I'v been trying to locate a pair and have had no luck as of today!
Are these 1100E's?
Regards,
jaybird
Are these 1100E's?
Regards,
jaybird
- Fri Aug 23, 2002 8:51 pm
- Forum: Classifieds
- Topic: Two, 128 meg, PC133 SDRAM, low density, double sided sticks
- Replies: 0
- Views: 3180
Two, 128 meg, PC133 SDRAM, low density, double sided sticks
I have 2, PC133 SDRAM double sided "sticks" that are known to work in a BP6.
What am I offered?
Please contact:
jaybird at;
jayfontaine1@juno.com
What am I offered?
Please contact:
jaybird at;
jayfontaine1@juno.com
- Thu Aug 22, 2002 7:47 pm
- Forum: Overclocking / CPU Database
- Topic: Pentium III 1000E
- Replies: 1
- Views: 3549
Pentium III 1000E
Can anyone please tell me what a Pentium III 1000E is?
It looks to be a 1Ghz cpu with a 100Mhz front side bus. Is this correct?
I would like to know if it is SMP enabled.
TNX
jaybird
It looks to be a 1Ghz cpu with a 100Mhz front side bus. Is this correct?
I would like to know if it is SMP enabled.
TNX
jaybird
- Fri Aug 16, 2002 5:29 pm
- Forum: Software
- Topic: WIN2000 Pro or XP Pro, which is best?
- Replies: 7
- Views: 9250
WIN2000 Pro or XP Pro, which is best?
I am presently running 98SE/NT4.0 SP5 dual boot. I want to go to one OS that will work with all my "stuff"(see below, I am concerned about drivers) and is SMP enabled. My #1 BP6 has: 2, PIII 850's w/NEO370's(minor overclocking) 512 meg Corsair P133 sdram 1 20gig & 1 60 gig WD hdd 7200rpms Matrox G40...
- Mon Aug 12, 2002 9:18 pm
- Forum: Overclocking / CPU Database
- Topic: Whats the max speed PIII upgrade the BP6 mobo can take?
- Replies: 3
- Views: 3417
Highest PIII on BP6
800's and 850's w/100mhz fsb seem to be the most common. However, there is a 1gig 100mhz PIII(OEM) that is smp but good luck in finding them! Last time I saw a pair for sale they were $185 USD each!
- Tue Aug 06, 2002 10:16 pm
- Forum: General Discussion
- Topic: WIN98SE/WINNT 4.0 network problems
- Replies: 5
- Views: 5440
- Mon Aug 05, 2002 10:05 pm
- Forum: General Discussion
- Topic: WIN98SE/WINNT 4.0 network problems
- Replies: 5
- Views: 5440
WIN98SE/WINNT 4.0 network problems
I need help in a big way! I have been running a 98SE/NT 4.0 small network(3 pc's) for several years with no problems but now, after I just reconfigured and reloaded my BP6 (98/NT dual boot), 98 is the only OS that networks properly. In 98 on all pc's I can see every one and they can see me and we al...
- Sun Aug 04, 2002 8:56 pm
- Forum: Software
- Topic: trouble installing Highpoint 366 drivers
- Replies: 2
- Views: 3515
HPPT drivers
What slot are you installing you sound blaster in, what IRQ's(although not always documented, most creative sound blaster cards use more than one IRQ) is it using and what version of windoz are you using?