BP6.Com

I'm at 124FSB!(sort of). Just for "grins" I just tried 124FSB and she's up and runnin! However, my G400 won't take that FSB at all. The only way I could tell it was running at 124 was to go in through the network using another PC and access the BP6 from there. I could access files and programs but d...

I am using a Matrox G400 MAX dual hd 32meg card on IRQ9(forced in BIOS)

I use WIN98SE/WIN2K Pro dual-boot

modified RU BIOS w/PIII micro-code
ATA HPPT 126 BIOS w/125 drivers, PCI 3, IRQ11, shared with generic Firewire card.

Just made the jump to 110 FSB with my 1100 PIII, NEO370, Arctic Silver, copper spacer, FEP32 heat sink on CPU and Arctic Silver plus an old fan from a 486 on my Northbridge controller chip!!!! ME VERY HAPPY!!!

OBTW, also using WINBXTUNE

The last entry I made was about a week ago. At that time I had just gone to a FSB of 108 with my single PIII. I have now made the jump to 110 and all seems to be ok(so far!).

My next change will be to tweak the BX chip set with WBXtune and WPCRSET.

Skuuz spellink errer's in last post, I just got up

Don't forget to actively cool the BX chip set. It made all the difference in the world for my 366's! I took the "greeie" heat sink off, added arctic silver and an old 486 cooling fan(held in place with a zip tie!) and my "unstable 366's @ 550" went to 571 and after burn-in went to 594 and stayed the...

If you are still interested, the hardware you have is just fine. However, if you want quality copy you should consider(IMHO) using VirtualDUB(freeware) as your capture and conversion software(VHS to computer), and TMPGEnc(freeware version) to convert to VCD format to DC-ROM. You can use NERO(freewar...

I run dual-boot, 98SE/WIN2000 Pro. However, I have some programs that don't respond well in 2000 and since I am running only 1 CPU as I stated in my first post it doesn't matter and I prefere to stay in 98SE.

Just a little up-date, am now at 108 fsb with no problems. Seems as if these P3's react a lot like the old celeries, the longer you run them at a certain fsb the easier it is to get them to go faster! The next step is to tweak the BX chip set with WBXtune and CPU CREDIT OBTW, does anyone have an old...

I have a version 1.1 board that has previously had 2 366's @ 605, air cooled. I am now running this board with 1, 1100 P3 @ 106 fsb. I have started the dual conversion by modifying the 2 NEO's (cut trace), added the wires to the sockets on the board and completed the EC10 modification. With both 110...

I would like to know exactly who is dual with 1100mhz, 100mhz fsb PIII's, what rev board and what mods were required to get there! I am dual PIII's with 850's and NEO's on one board with no other mods except cut trace and wire added to cpu sockets. On second board I have moded NEO's (cut trace), add...

Correct, it does show the NEO mods required, however, it doesn't give you "the rest of the story". You will need to make the voltage regulator modifications as well as changing C10. I know, I tried without the voltage regulator mods and can only get 1, 1100E PIII up and running on this board. On ano...

Don't want to throw water on your "fire" but doing just the NEO's in most cases doesn't cut it. I'v done that and no-go on one of my boards, I then did the "CAP" upgrade (EC10, I believe) and no-go also, now I'll do the voltage regulator+cap upgrade. I am using 2 modified NEO's and 2 PIII 1100E's (1...

I just got a "driver and application update" CD from Creative and EVERYTHING is now working fine in WIN2K.

Cost me $2.95 for shipping and handling, took a week to get.

Regards,

jaybird

I have been using a SBLive Platinum on my BP6 for several years now with no problems (98SE/NT4.0 dual-boot). However, I just upgraded to Win 2000 Pro (98SE/WIN2K Pro dual-boot) and I cannot load ANYTHING from my Creative CD's. I get as far as the first splash screen, tell it to load SBLive (thats al...

I now have WIN2K/98SE dualboot but only on the IDE controller. I have installed(correctly?, unsure)a win2k device driver (BETA 3) from this website. When connected to the ATA controller I can only get as far as the WIN2K splash screen, the bar moves halfway and my system freezes and won't go into wi...

Ok, it seems that I can just simply do an "upgrade" to win2k and it should work. However, when attempting to upgrade I get a message that my ATA66 HPT366 controller will not work with this version of windows. I guess that the NT drivers are not compatable with win2k? I have downloaded the win2k driv...

Great! But I forgot to mention one thing, I want to replace NT with 2000 Pro and maintain dualboot.

Will I still do the same thing and then just install 2000 Pro?

Regards,

jaybird

I have WIN98SE and NT4.0SP6 on my BP6 and I want to uninstall NT without disturbing my 98 OS and it's programs, can this be done? Here is my configuration on the primary hard drive: C: is a FAT16 partition, 2 GIG, 98 and hardware related files only D: is a FAT16 partition, 2 GIG, NT and hardware rel...

The information I have from Abit suggests that this condition (boot only from one socket) is normal!

I'll see if I can find it and forward it to you.

Good luck!

jaybird

This is my second BP6 modded board. However, the first one went much better than this one! On the first board I modded the NEO's(100mhz PIII 850's), added the 2 wires to the sockets on the back side of the board., changed the EC10 cap and away we went(no voltage regulator mod)! Not so good on this o...

Im not sure if this is the place for this but I REALLY need some help. I have a very heavely configured BP-6; 2 PIII 1100's at 100 mhz fsb (NEO 370's and board mods) 768 meg PC133 RAM 1 60gig & 1 80gig hdd G400 MAX 32 meg vid card SBLive Platinum Adaptec SCSII card for scanner Adaptec firewire card ...

I just loaded Premiere 6.0, loaded my firewire card softeware(which puts it's presets into Premiere), fired up Premiere, new project, settings, selected my firewire card presets for capture(MotoDV, which is Digital Origin, DV, NTSC, MotoDV, 720 x 480) and hit enter. It tells me that the "preset" req...

I need a DVD authoring tool that will work with NT4.0. Does anybody know of such an animal?

Yep, you got it! A NEO S370 and a 1100 PIII, 100 mhz front side bus CPU and a way you go! Almost, check vvt, I had problems, had to use cpu socket closest to 1st ram socket and clips from heatsink contacted ram and caused short, be carefull! Also, things got weird and I wound up fdisk and lowlevel f...