I refuse to give up on this machine
-
- Board Admin
- Posts: 1395
- Joined: Wed Jul 24, 2002 7:39 am
- Location: Lincoln, NE USA
- Contact:
it's very hard to get a bp6 to install off a cdrom
i have 1 2K disc that actually works
you might try getting a bootdisk from www.bootdisk.com
i have 1 2K disc that actually works
you might try getting a bootdisk from www.bootdisk.com
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
weeliano
nah this wouldn't be the case
the HPT366 contoller is notorious for causing problems with harddrives
hence i don't use it
nah this wouldn't be the case
the HPT366 contoller is notorious for causing problems with harddrives
hence i don't use it
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
and not only the hard drives.... try to put some CD-ROM or better some CD-Writer...
And then you will see what I mean...
Exactly not the best experience you might have with your hardware....
I am thinking right now of some silicon sealing those HTP666 IDE connectors forever
Just for not getting them connected by mistake hehehehe
And then you will see what I mean...
Exactly not the best experience you might have with your hardware....
I am thinking right now of some silicon sealing those HTP666 IDE connectors forever
Just for not getting them connected by mistake hehehehe
Dual C366@550MHz 1.90V (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system