Proud Member

Post Reply
Puppas
Posts: 22
Joined: Sun Jul 11, 2004 2:30 pm

Proud Member

Post by Puppas »

Hi there, just wanna say hello.
I have been looking at this forum for a long time, so last week i finally found a BP6 motherboard, actually, two BP6 motherboards.
I got 2*Cel. 500's @ 585 running on one Bp6, the other is waiting for a Dual PIII mod. Take a peek at my pics if you are interested.
http://www.bp6.com/board/album_personal ... er_id=8238
I like this forum, lots of info and good pics.

// Andreas from Sweden
Last edited by Puppas on Sun Jul 18, 2004 5:03 pm, edited 1 time in total.
vultura
Posts: 8
Joined: Sat Jul 17, 2004 3:15 pm
Location: UK

Post by vultura »

Greetings Puppas.

I too am new here, so you are are not alone. This site has proved invaluable to both myself and a BP6 owning colleague.
InactiveX
BeOS Forever
Posts: 1385
Joined: Wed Jul 24, 2002 8:25 am
Location: UK

Post by InactiveX »

Hello to you both!

It's great that the BP6 and BP6.com are still attracting new disciples. :)

You can further the cause by becoming a BP6.com member. Click here for details.

Puppas: That's a really nice case. Have you thought of using rounded IDE cables?
vultura
Posts: 8
Joined: Sat Jul 17, 2004 3:15 pm
Location: UK

Post by vultura »

@InactiveX. Thanks for the welcome. FYI I have owned a BP6 for over two years, only now have I decided to participate a little on these forums.
Derek
Site Admin
Posts: 2489
Joined: Tue Jul 23, 2002 3:55 pm
Location: Canada
Contact:

Post by Derek »

Hey guys! Good to see you and I hope to read many more of your posts. I'm happy you decided to join in on the conversation :)

Derek
-Derek
Billl
Posts: 211
Joined: Fri Jul 25, 2003 1:52 pm
Location: USA

Post by Billl »

Welcome aboard to both of you.



Billl
Holodeck2
Modder Extraordinaire
Posts: 256
Joined: Fri Jun 13, 2003 12:57 am
Location: Purdue University
Contact:

Post by Holodeck2 »

2 words: Bling Bling!
yea, back from the dead

If it ain't broken, mod it until it is
Puppas
Posts: 22
Joined: Sun Jul 11, 2004 2:30 pm

Post by Puppas »

Thank you all for the welcome.

Yes the rounded cables are coming. I was going to use them but they didn't fit. One of the pins in the cable are plugged, but on the mobo ther IS a pin, so...
I am going to put on some more cooling, i will post some pics when that is done.
The BP6 is so cool, it was very hard to find here in Sweden because it's so old. But i got 'em 8)
Puppas
Posts: 22
Joined: Sun Jul 11, 2004 2:30 pm

Post by Puppas »

Thank you all for the welcome.
Yes the rounded cables are coming. I was going to use them but they didn't fit. One of the pins in the cable are plugged, but on the mobo ther IS a pin, so...
I am going to put on some more cooling, i will post some pics when that is done.
The BP6 is so cool, it was very hard to find here in Sweden because it's so old. But i got 'em 8)
BCN
Posts: 508
Joined: Tue Nov 26, 2002 9:50 am
Location: Barcelona, Spain
Contact:

Post by BCN »

just push in through that in and the cable will go in, you will have that missing hole...

I did that :)
Dual C366@550MHz 1.90V :) (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
purrkur
Linux Guru
Posts: 687
Joined: Fri Dec 12, 2003 5:57 pm
Location: Sweden
Contact:

Post by purrkur »

Puppas: where did you end up getting your BP6 boards? I am looking for a second one as well....
2x533MHz@544MHz, 2.0V
640MB PC100 memory
Realtek RTL-8139 NIC
Maxtor 6Y080L0 80GB hdd
Debian Linux stable with 2.4.8 kernel
Puppas
Posts: 22
Joined: Sun Jul 11, 2004 2:30 pm

Post by Puppas »

En fick jag tag i på www.tradera.com och en hittade jag hemma i Östersund hos en privatperson. 700:- /st med processorer på.
purrkur
Linux Guru
Posts: 687
Joined: Fri Dec 12, 2003 5:57 pm
Location: Sweden
Contact:

Post by purrkur »

Puppas wrote:En fick jag tag i på www.tradera.com och en hittade jag hemma i Östersund hos en privatperson. 700:- /st med processorer på.
Vilken tur du hade! Tack för info'n!
2x533MHz@544MHz, 2.0V
640MB PC100 memory
Realtek RTL-8139 NIC
Maxtor 6Y080L0 80GB hdd
Debian Linux stable with 2.4.8 kernel
Post Reply