Got a package from Taiwan (Jackcon) today.

Post Reply
Tim_K
Posts: 79
Joined: Tue Nov 30, 2004 1:44 am
Location: Southwest PA
Contact:

Got a package from Taiwan (Jackcon) today.

Post by Tim_K »

A couple weeks ago, I emailed Jackcon in Taiwan and asked about getting replacement capacitors for my BP6. They emailed back and said it'd cost something like $70 with shipping, so I forgot about it. I had sent an email to badcaps.net yesterday to see about custom ordering a cap kit, and today the mailman brought me a registered, signature required letter from Taiwan!

Surprise!

It was exactly as I'd ordered it in the first email. I'd researched the topics here and came up with a custom combination. Here's what I got:

1 - 25 volt 10 uf 4 by 7 mm
3 - 16 volt 100 uF 6 by 7 mm
5 - 16 volt 1500 uF 10 by 20 mm
12 - 6.3 volt 1500 uF 8 by 16 mm
12 - 6.3 volt 2200 uF 10 by 20 mm

They're all Jackcon caps, each kind packed in its own heat sealed bag with a label. Couldn't ask for better, as long as these caps don't blow out on me.

So I'm a little happier today! :D
See "Online Video" the internets comedy / opinion webshow, at www.loudmouthtim.com !
Billl
Posts: 211
Joined: Fri Jul 25, 2003 1:52 pm
Location: USA

Re: Got a package from Taiwan (Jackcon) today.

Post by Billl »

Tim_K wrote:A couple weeks ago, I emailed Jackcon in Taiwan and asked about getting replacement capacitors for my BP6. They emailed back and said it'd cost something like $70 with shipping, so I forgot about it.
So did they charge you for the caps or not? Your not very clear on that.


Billl
Tim_K
Posts: 79
Joined: Tue Nov 30, 2004 1:44 am
Location: Southwest PA
Contact:

Post by Tim_K »

No, I never paid anything, they just sent the capacitors based on that one email where I listed specific sizes of caps.

I wasn't even expecting to get it. After I read the email saying it'd cost something like $70, I just said "forget it" and didn't email them anymore.

But they sent the package, so the caps will get put to good use.
See "Online Video" the internets comedy / opinion webshow, at www.loudmouthtim.com !
BCN
Posts: 508
Joined: Tue Nov 26, 2002 9:50 am
Location: Barcelona, Spain
Contact:

Post by BCN »

I have also received them from jackson today! :) the list I sent them from the above. eventhough they did not respond after I have passed my address and the list to them and I did not expect it to arrive. though it arrived open, nothing is missing I guess, and the post said, they have received it like that... I really doubt...

Well, they are here... :)
Dual C366@550MHz 1.90V :) (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
Merlin55
Posts: 17
Joined: Sun Mar 13, 2005 2:43 pm
Contact:

me too

Post by Merlin55 »

I posted this elsewhere, but I got my caps today! sent them the list and my address mentioned bp6.com said they were standing behind the bad cap replacements and they sent me free caps as per the list 25 new ones \o/

Merlin
BP6 2x500 Mendicino cores
Radeon 7500
640 Megs PC133
Benq Dual Layer DVD Burner
CD burner
Mirconet gigabit Nic
10 gig main hd
80 gig mp3 and program stores
Derek
Site Admin
Posts: 2489
Joined: Tue Jul 23, 2002 3:55 pm
Location: Canada
Contact:

Post by Derek »

Sweet!
-Derek
Merlin55
Posts: 17
Joined: Sun Mar 13, 2005 2:43 pm
Contact:

caps

Post by Merlin55 »

Well did a partial recap on the obvious bad caps, voltages & temps are very stable now. But 75mhz on the FSB is about all it will handle and even at that XP says it has to recover from a fatal error once in awhile, so effectively 71.99 mhz is it, not even worth the time to run it up. But now I need some large sticks of memory. Oh another thing I ran into, the Promise ata 66 cards conflicts my nic card.......so I kept the gigabit nic card in and pulled the ata 66.....might have to sell off that bad boy. Can't wait for Xandros to finish downloading. I don't think the BP6 will be on windows xpee too long.

Merlin
BP6 2x500 Mendicino cores
Radeon 7500
640 Megs PC133
Benq Dual Layer DVD Burner
CD burner
Mirconet gigabit Nic
10 gig main hd
80 gig mp3 and program stores
InactiveX
BeOS Forever
Posts: 1385
Joined: Wed Jul 24, 2002 8:25 am
Location: UK

Post by InactiveX »

Have you tried shuffling the conflicting cards into other slots? NICs in particular are known not to like sharing resources.
Like BP6.com? Not a member?
Then why the hell not? It's great!
-> BP6.com Membership <-
Merlin55
Posts: 17
Joined: Sun Mar 13, 2005 2:43 pm
Contact:

Post by Merlin55 »

InactiveX wrote:Have you tried shuffling the conflicting cards into other slots? NICs in particular are known not to like sharing resources.
Yeah one of the first things I tried, I even moved the sound card as well, still the promise card took over and the nic wouldn't work or if it did it disappeared even without using the ata card.
BP6 2x500 Mendicino cores
Radeon 7500
640 Megs PC133
Benq Dual Layer DVD Burner
CD burner
Mirconet gigabit Nic
10 gig main hd
80 gig mp3 and program stores
kretslopp
Posts: 9
Joined: Wed Apr 27, 2005 6:16 pm
Location: umeå sweden
Contact:

Post by kretslopp »

I emailed them a few hours ago. And a few minutes ago I received a reply:

"Dear Benjamin J,

will send the mentioned caps to you by mail.

Best Regards
John"

Sympathetic fellows there.
kretslopp
Posts: 9
Joined: Wed Apr 27, 2005 6:16 pm
Location: umeå sweden
Contact:

Post by kretslopp »

...and today only 6 days since their reply the package arrived. :)
Derek
Site Admin
Posts: 2489
Joined: Tue Jul 23, 2002 3:55 pm
Location: Canada
Contact:

Post by Derek »

Stickied.
-Derek
kuun
Post-O-Matic
Posts: 1566
Joined: Sat Nov 02, 2002 5:26 pm
Location: Tennessee
Contact:

Post by kuun »

whats this email?!

free caps for cap replacement?

i must have.. this will make me more eager to do the cap replacement
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user

The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
s4brains
Posts: 46
Joined: Sun Aug 28, 2005 10:36 am

Post by s4brains »

ditto what kuun says!
Post Reply