1.4 celeron
-
- Posts: 90
- Joined: Wed Aug 21, 2002 6:19 pm
- Contact:
so we just need to mod a bit or use some adapter!
I still did not get my 370GUs (X-mas post...)
Just when I get it, I will let you know about my success or the oppposite!
I am anxious myself to get them running on my board!
I will try on 66FSB first and that's without modding - leter I will mod the mobo for beter power supply anyway.
I still did not get my 370GUs (X-mas post...)
Just when I get it, I will let you know about my success or the oppposite!
I am anxious myself to get them running on my board!
I will try on 66FSB first and that's without modding - leter I will mod the mobo for beter power supply anyway.
Dual C366@550MHz 1.90V (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
there should not be any real reason not to believe that it would not work, cause there is not a lot of modding from FCPGA to FCPGA2.
I will tell about my results with adapters as soon as I will get one Tualatin in my hands
Voltages? BP6 has no problems with voltages, cause it can supply from 1.3V up to 3.0V (the part 2.4-3.0V) is not available in BIOS, for that you need to change mosfets to work properly and for tualatins or any PIII you just do not need it
I will tell about my results with adapters as soon as I will get one Tualatin in my hands
Voltages? BP6 has no problems with voltages, cause it can supply from 1.3V up to 3.0V (the part 2.4-3.0V) is not available in BIOS, for that you need to change mosfets to work properly and for tualatins or any PIII you just do not need it
Dual C366@550MHz 1.90V (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system