Just wondering if anyone has gotten Coppermine CPUs (single or dual) to boot with those cheap Lin-Lin adapters on the BP6.
When I tried, I got a blank screen and no beeps. I am thinking of doing the Yoichiro mods, but I'm just curious if anyone else had gotten it to work with the Lin-Lin adapters before I go and modify my precious BP6
Any success with CuMine + Lin-Lin adapter + BP6?
-
- Posts: 15
- Joined: Sun Apr 03, 2005 5:51 pm
Re: Any success with CuMine + Lin-Lin adapter + BP6?
I believe the Lin-Lin adapters go from FC-PGA to FC-PGA2, in other words, they upgrade a coppermine socket to a tualatine socket.swampwater wrote:Just wondering if anyone has gotten Coppermine CPUs (single or dual) to boot with those cheap Lin-Lin adapters on the BP6.
When I tried, I got a blank screen and no beeps. I am thinking of doing the Yoichiro mods, but I'm just curious if anyone else had gotten it to work with the Lin-Lin adapters before I go and modify my precious BP6
You need to use the Neo S370s. See the PIII mods. It's the only way I've heard of it being done.
Jeff
-
- Posts: 4
- Joined: Sun Feb 13, 2005 10:27 pm
from the instructions on the box those adaptors allow tualatin cpu's on older mobo but also allow cumine based cpu's to run in older 370sockets. I think its the jumpers used to configure them. You need 6jumpers to allow p3 compatibility. I hope to get myne working as I have both the cpu's and the adaptors.
BTw you need a bios flash to allow it also.
BTw you need a bios flash to allow it also.
-
- Posts: 15
- Joined: Sun Apr 03, 2005 5:51 pm