Fastest Celeron 366?
-
- Board Admin
- Posts: 1395
- Joined: Wed Jul 24, 2002 7:39 am
- Location: Lincoln, NE USA
- Contact:
-
- Board Admin
- Posts: 1395
- Joined: Wed Jul 24, 2002 7:39 am
- Location: Lincoln, NE USA
- Contact:
Sorry about that...
The top end for the original Celeron's is about 600Mhz to 624Mhz.
On one of my BP6 systems, I have dual 366's O/C'd to 110Mhz FSB (~ 605Mhz for the Celeron's). The system locks up randomly. So, I will be doing some modifications (replacing voltage regulator capacitors, first) to try and stabilise the system.
The top end for the original Celeron's is about 600Mhz to 624Mhz.
On one of my BP6 systems, I have dual 366's O/C'd to 110Mhz FSB (~ 605Mhz for the Celeron's). The system locks up randomly. So, I will be doing some modifications (replacing voltage regulator capacitors, first) to try and stabilise the system.
-
- Board Admin
- Posts: 1395
- Joined: Wed Jul 24, 2002 7:39 am
- Location: Lincoln, NE USA
- Contact:
Over 900Mhz sounds like Celeron II's or Pentium III's. Cooling will help some but will not address any type of voltage instability that may be present on the mainboard. Also, having a "matched pair" of Celeron's is important to achieving highest possible speed.Vaskunito wrote:Oh I see. So the claims of people getting over 900Mhz is not true huh?
What about cooling? Is it possible to stabilise your system by improving your cooling and not resorting to modifications?