Celeron 400 cooling

Batch codes, RAM specs, BIOS settings, etc..
Post Reply
darv
Posts: 3
Joined: Thu Mar 25, 2004 3:17 pm

Celeron 400 cooling

Post by darv »

i have a modo coming (BP6) :D :D :D but looking to overclock them and looking at heatsinkd, but would like one og the roundy ones like http://www.overclockers.co.uk/acatalog/ ... n_121.html.
but dont now wich ones will fit with out much modification, as im not feelin up to much hehe, basicly lazzy hehe...

any recomendations would be much apreshiated.

darv

PS. being new to the and im LOVING it, brill site
InactiveX
BeOS Forever
Posts: 1385
Joined: Wed Jul 24, 2002 8:25 am
Location: UK

Post by InactiveX »

Hello there darv,

I'm not sure whether they'd fit (not too well-up on the latest HSFs), maybe someone else here (RRLedford?) would know.

I do know however, that www.overclockers.co.uk are a very good supplier - I've dealt with them several times - and if you phone them and ask whether it would fit they should be able to advise you.
Like BP6.com? Not a member?
Then why the hell not? It's great!
-> BP6.com Membership <-
davd_bob
Confused
Posts: 1043
Joined: Fri Feb 13, 2004 2:30 am
Location: Houston, TX

Post by davd_bob »

check out thomshardware.com for a bunch of cpu coolers they benchmarked before you make the final choice.
There are *almost* no bad BP6s. There are mostly bad caps.

No BP6s remaining
Athlon 2800
Sempron 2000
ViaCPU laptop with Vista.(Works great after bumping ram to 2Gig)
P-III 850@100
BCN
Posts: 508
Joined: Tue Nov 26, 2002 9:50 am
Location: Barcelona, Spain
Contact:

Post by BCN »

evercool coolers are nice by the way, the ones with 7cn fans... fit nice on BP6 :)
Dual C366@550MHz 1.90V :) (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
darv
Posts: 3
Joined: Thu Mar 25, 2004 3:17 pm

Post by darv »

what evercool heatsink is that??
BCN
Posts: 508
Joined: Tue Nov 26, 2002 9:50 am
Location: Barcelona, Spain
Contact:

Post by BCN »

full copper - don't remember the name though
Dual C366@550MHz 1.90V :) (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
BCN
Posts: 508
Joined: Tue Nov 26, 2002 9:50 am
Location: Barcelona, Spain
Contact:

Post by BCN »

full copper - don't remember the name though
Dual C366@550MHz 1.90V :) (History)
yet single PIII-S 512Kb L2 cache at 1400MHz@700MHz
BP6 (not modded yet)
256MB PC133 C2
GF4Ti4200-8x
Maxtor 2x60Gb - all on promise ATA133
Lite-On LTR 40125S@48125W!!!
Plus P4 system
Edwin
Posts: 1
Joined: Sun Mar 07, 2004 6:49 pm

Post by Edwin »

Dual Cel.400@589MHz 2.30V :twisted:
on BP6 with 320 MB PC133
Radeon 7500 64Mb DDR
2x20Gb WDHDD (mirorr)
SB Life! Platinum (5+1)
Teac CD-W58E
Sony CDU5211
Eizo F35 + Samsung Flat
Big Tower (2x300W)
Win 2k + WinMe + Mandrake 9.1
....what You think :?:
...What I must change and why,if..?
Billl
Posts: 211
Joined: Fri Jul 25, 2003 1:52 pm
Location: USA

Zalman Coolers

Post by Billl »

Darv the ones your looking at only work on current Motherboards. I just bought two of them, work great on P4's. They work on socket 478, 462, and 754. Here is the link to their web site. It will show you all the applications they can be used for. http://www.zalman.co.kr/


Bill
Post Reply