Daaaa--daa-daa-daa
Video error.
BP6 dont boot?
-
- Board Admin
- Posts: 1395
- Joined: Wed Jul 24, 2002 7:39 am
- Location: Lincoln, NE USA
- Contact:
attempt to use a pci video card
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
p.baux, I´ve had similar symptom for some time and I recently got rid of it. The BP6 hung with a black screen on reboot, I had to power off/on to boot it again. Now it works like it should, and IIRC the only thing I changed was that I activated the standard IDE that was disabled by that time. So check if all IDE channels are activated.
There seems to be something wrong with the IDE controller settings in the BIOS (I´m using the standard RU BIOS). Right now, I have a CDROM on the secondary standard IDE that works perfectly, BUT all standard IDE entries in the BIOS say "NONE"=not installed. So Windows should´t "see" the CDROM, right? I vaguely remember IDE components working on the standard IDE controller even when it was disabled...
There seems to be something wrong with the IDE controller settings in the BIOS (I´m using the standard RU BIOS). Right now, I have a CDROM on the secondary standard IDE that works perfectly, BUT all standard IDE entries in the BIOS say "NONE"=not installed. So Windows should´t "see" the CDROM, right? I vaguely remember IDE components working on the standard IDE controller even when it was disabled...
BP6, RU BIOS, XP SP3, ACPI, 2x366@523(1,95V), Pentalpha HS + 1x 12cm fan @5V, 768MB, Powercolor Geforce 3, RTL8139D NIC, Terratec EWS64L, Samsung M40 80GB (2,5''), LiteOn CDRW