I'v determined that I have to much "stuff" going on on the PCI bus and its' affecting my ability to do high rez video capture (above 640 X 480) so I decided to remove several devices and there cards from the IDE bus.
I bought several (4) IDE to USB 1 & 2 "converters' (plugs into the the IDE cable port on the back of the drives) and a 4 port hub (I have 4 optical drives), I installed the "converters", made sure that there was power to each one and hooked them up to the hub.
I only "see" 2 of the 4 drives in explorer and they don't work properly (can't play music CD's, no sound)!
I know very little about USB, do I need to re-install the devices and their drivers, should I have only hooked up 1 at a time (did hooking up all 4 at once "confuse" my PC?, I know I'm confused! )?
Regards,
jaybird
question about USB, converters and optical drives
-
- Board Admin
- Posts: 1395
- Joined: Wed Jul 24, 2002 7:39 am
- Location: Lincoln, NE USA
- Contact:
Re: question about USB, converters and optical drives
Do you have these USB connected to USB version 1.1 (what we have standard on the BP6) then I would definitely not recommend this. USB V1.x only delivers 12 Mbps in theory (and less in practice) so in theory one of those optical drives would be enough to saturate your USB bandwidth. Things get better with USB2 but they are still no substitute for P-ATA or S-ATA.jaybird wrote:I'v determined that I have to much "stuff" going on on the PCI bus and its' affecting my ability to do high rez video capture (above 640 X 480) so I decided to remove several devices and there cards from the IDE bus.
I bought several (4) IDE to USB 1 & 2 "converters' (plugs into the the IDE cable port on the back of the drives) and a 4 port hub (I have 4 optical drives), I installed the "converters", made sure that there was power to each one and hooked them up to the hub.
Make sure that they are all turned on and make sure that your USB hub doesn't have some sort of restrictions concerning attached components. As for the music CD's, make sure that you got a cable going from your CD player to your sound card. This has nothing to do with your USB connection.jaybird wrote:I only "see" 2 of the 4 drives in explorer and they don't work properly (can't play music CD's, no sound)!
You should not have to re-install anything. Make sure your USB hub can deliver the goods, try alternating the drives (checking if they work in any other type of order). You should also check the two drives that are working to see what they are set to (master, slave or cable select). Then make sure that the other two that you don't see are set up the same.jaybird wrote:I know very little about USB, do I need to re-install the devices and their drivers, should I have only hooked up 1 at a time (did hooking up all 4 at once "confuse" my PC?, I know I'm confused! )?
2x533MHz@544MHz, 2.0V
640MB PC100 memory
Realtek RTL-8139 NIC
Maxtor 6Y080L0 80GB hdd
Debian Linux stable with 2.4.8 kernel
640MB PC100 memory
Realtek RTL-8139 NIC
Maxtor 6Y080L0 80GB hdd
Debian Linux stable with 2.4.8 kernel
Well, I've solved some of my problems! Number 1, the sound went away because my daughter (26, knows everything, dad doesn't know a thing) accidently deleated my sound drivers !
As far as the USB, this is USB 2, and not a BP6 although I wanted to do something like this on my BP6's.
No, I did not make sure the USB hub was powered up first and no, I did not connect one device at a time, I hooked them all up at once !
Back to the drawing board !
Thanks people, this forum has always been helpful even if its' not a BP6!
OBTW, just found a version 1 BP6, 2 500's, heatsinks, 256 meg ram, 64 meg vid card and a sound card (not sure what kind) for under $60 USD with a no DOA guarantee !
Regards to all,
jaybird
As far as the USB, this is USB 2, and not a BP6 although I wanted to do something like this on my BP6's.
No, I did not make sure the USB hub was powered up first and no, I did not connect one device at a time, I hooked them all up at once !
Back to the drawing board !
Thanks people, this forum has always been helpful even if its' not a BP6!
OBTW, just found a version 1 BP6, 2 500's, heatsinks, 256 meg ram, 64 meg vid card and a sound card (not sure what kind) for under $60 USD with a no DOA guarantee !
Regards to all,
jaybird
Mine's only 16 and knows even more.jaybird wrote:...my daughter (26, knows everything, dad doesn't know a thing) !
Jay, I didn't know you were old enough to have a young'un that age!!
There are *almost* no bad BP6s. There are mostly bad caps.
No BP6s remaining
Athlon 2800
Sempron 2000
ViaCPU laptop with Vista.(Works great after bumping ram to 2Gig)
P-III 850@100
No BP6s remaining
Athlon 2800
Sempron 2000
ViaCPU laptop with Vista.(Works great after bumping ram to 2Gig)
P-III 850@100
Age, UGH!
Yeah, well I have 3 "childern", 26, 32 & 35, We just passed our 36th wedding anniversary plus I have 5 grandchildren.
My how time flies when 'yer haven fun !
Hobbies: 'Puters, hotrods, drag racing, fishing an chasen the wife around !
Regards,
jaybird
My how time flies when 'yer haven fun !
Hobbies: 'Puters, hotrods, drag racing, fishing an chasen the wife around !
Regards,
jaybird