"The Mod"
Posted by The DareDevil @ 3:34PM PDT
I bet you cant guess whats finished? Nope, its the P3 mod! (I knew you wouldnt get it). I havent setup the printer friendly pages yet, give me a few more minutes.
Name:some1
E-Mail: Comment:
Dared Devil is only trying to stir up things. Ignore the poor bastard and just enjoy Anton's succes. I'm sure a lot of others are gonna try this mod!
Looks pretty complicated though, I'll have to read the guide a few times b4 and during.. thats 4 sure.. But loving it! :)
Name:The DareDevil
E-Mail:TheDareDevil@BP6.Com Comment:
I'll post a movie of his mod in action.
What does this guy have to do to prove that it works. Your quite right in asking for proof(a little less agressively would be nice!) and yes, write ups and pics are not definative, but apart from us all going round Antons home or waiting untill others have done this mod I dont see how it can be proved.
Unless you have a suggestion?
Name:Anton
E-Mail:antont@rila.com Comment:
I've send the corrected Vcmos mod picture. And a short movie about 5 min showing the modded bp6 in action. Cheers!
Name:The Dared Devil
E-Mail: Comment:
OK DD. I Will abide by your rules. I can be civilized, most of the time, If people are civil with me.
But i ask anton again, words and pictures dont mean anything i need hard evidence.
Doesn't anyone else wont proof more than words..?
Name:The DareDevil
E-Mail:TheDareDevil@BP6.Com Comment:
Okay, okay guys! Let's not argue about anything! This is supposed to be a "HAPPY TIME" =P
Name:Anton
E-Mail:antont@rila.com Comment:
Once again - the Vcmos mod is:
Remove Vcmos socket pin AB36
Solder Vcmos_2.5 to Vcmos (Z36 to AB36)
Sorry for the mistake, I wrote the guide in a hurry.
Good luck!
Name:Anton
E-Mail:antont@rila.com Comment:
Roby: Yes. In fact Vcmos is connected to Vcmos_1.5 internally on the processor. You have to remove the Vcmos_1.5 pin or you will short Vcmos_1.5 and Vcmos_2.5 if you connect AB36 to Z36 because AD36 is internally connected to AB36 on the CPU. When you remove AB36 socket pin, you break the internal CPU connection:
Jack: I told you you are a lamer. Don't send me your silly email trojans, they work only on loosers like you.
Please excuse...
Pin AB36 is V_CMOS (look at the picture)!!! So i must connect V_CMOS with V_2.5 --> Pin AB36 to Z36 and to remove AD36 ??!?
SYS Roby
Name:The Dared Devil
E-Mail: Comment:
Anton i ask you again, proof it.
If you cant proof it dont claim other peoples work.
If you really want to get personal so can i, just ask hyperspace !
Name:The Dared Devil
E-Mail: Comment:
Anton ...its you that cannot provide the proof.
He who laugh's last ,laugh's longest ! as they say !
And i feel a damn long laugh starting soon.
Name:Anton
E-Mail:antont@rila.com Comment:
Roby: you have to connect ad36 to z36. i'm sorry this a diagram i made before i realized that ab36 to z36 doesn't work. once again, the correct is ad36 (Vcmos) to z36 (Vcmos_2.5). I'll send an updated picture to DD today. Regards
Jack: you are a pathetic looser, man. I'm laughing at you, and don't waste me time there are enough lamers on the internet. Go get a job, looser.
Name:The Dared Devil
E-Mail: Comment:
Just one more thing, I remember a while back when BBA and JJC did these mods that BBA made a typo in his write up and forum posts regarding Pin AB36 (AD36),Is is just history repeating itself or am i really the master of time travel, No! I just think it's more proof of cut and paste a little from here and there and paste it here in my (anton) new mods....!!!!
You been taken for a ride DD...!!!!!!!!!!!!!
Name:The Dared Devil
E-Mail: Comment:
Nice write up....!!!
But its just a copy of intel spec's and development sheets, which are available to anyone.
So like i said where is the proof..???
So simple to do... So why didnt anyone (Powerleap etc.) Do it.
Is it just a ploy to bring some more hits to the site and to antons work site...?
Like i said DD, theres no evidence here that it's running, only a written thesis as to what we already know from intel spec sheets.
Anyone do the Jap guy mod's...? No proof here either..!!!
You must have hard evidence DD. Until then i dont think you can claim it's been done !!!!
So who's gona be first to try and blow the shit out of a perfectly good mobo ?
Abit could quiet easily have done these mods and released a bp6 version 2 to run P3 on bx440 instead of the via crap they used in vp6, give me a break guy's, you talk the biggest load of bollocks since JR Leduc posted his FAQ's.
God damn losers.
Someone proof me wrong, hard evidence DD, then i'll apologise to everyone, but till then if you keep on claiming it works, i'll keep on brining you back down to earth !
Regards
Jack.
Hey there hyperspace, love to f*** your daughter's
Name:gt2i
E-Mail:gt2i@x86-secret.com Comment:
here's my Email :
or here: gt2i@gtr.zzn.com
that's really something! :) I am awaiting to see the photos of the sockets just to looook at them! :) Wow, again!
Anton, you are the best! :) Now we just need to wait until someone does the mod on BP6 for dual Tualatin P3! :)
Name:The DareDevil
E-Mail:TheDareDevil@BP6.Com Comment:
Originally I was going to translate it... But you just gave me a better idea :) I'll email you after I eat some dinner.
Name:gt2i
E-Mail: Comment:
That will leave my the time to understand all diagrams !
Could I take this guide and put it on my website, in French ? -> www.x86-secret.com
Name:The DareDevil
E-Mail:TheDareDevil@BP6.Com Comment:
For now there are lots of diagrams.
Name:The DareDevil
E-Mail:TheDareDevil@BP6.Com Comment:
I'm adding them tonight. That and the printer friendly version. I hope you enjoy the layout, I tried to make it as simple as possible.
Name:gt2i
E-Mail: Comment:
very cool ! thanks !!!
but no pictures ?