Search found 350 matches
- Sun Apr 03, 2005 4:41 am
- Forum: Articles / Knowledge Base
- Topic: [ KB ] Q6 VTT $2 Fix
- Replies: 48
- Views: 111944
Re: Vtt and EC10 - a following story
Oh, and this leads me to another point: caps don't need to look bad to be bad. There are lots of failure modes for electrolytic caps. Mine started leaking electrically, and not visibly, and it got to the point where a 400W PSU couldn't keep up with the board's power demands. I inspected the board r...
- Sun Apr 03, 2005 4:35 am
- Forum: Articles / Knowledge Base
- Topic: [ KB ] Q6 VTT $2 Fix
- Replies: 48
- Views: 111944
Re: Vtt and EC10 - a following story
i've got a board that has some VTT problems, and winXP is hanging beacuse of it...for now, it's stable, with replacing EC10 with 1500(mikro)F/10V capacitor... now i'm thinking about q6 problem...in your article, you say that LM317T or LM350T wont do the trick! the problem is that i cannot find LT15...
- Sat Apr 02, 2005 10:43 am
- Forum: Articles / Knowledge Base
- Topic: [ KB ] Q6 VTT $2 Fix
- Replies: 48
- Views: 111944
Re: Vtt and EC10 - a following story
- A maintenance and stabilization of ABIT BP6 - Some unstable factors resulting from the mother board when overclocking the 'Celeron 366' in dual operation are resolved and came to carry out stable operation at 100MHz FSB. http://www.finetune.jp/~lyuka/interests/pc/bp6.html How do you like this? Pl...
- Sat Apr 02, 2005 10:42 am
- Forum: Articles / Knowledge Base
- Topic: [ KB ] Q6 VTT $2 Fix
- Replies: 48
- Views: 111944
Re: Vtt and EC10 - a following story
- A maintenance and stabilization of ABIT BP6 - Some unstable factors resulting from the mother board when overclocking the 'Celeron 366' in dual operation are resolved and came to carry out stable operation at 100MHz FSB. http://www.finetune.jp/~lyuka/interests/pc/bp6.html How do you like this? Pl...
- Sat Apr 02, 2005 5:46 am
- Forum: Software
- Topic: problems with hangs...
- Replies: 3
- Views: 7638
- Thu Mar 24, 2005 4:47 am
- Forum: Software
- Topic: problems with hangs...
- Replies: 3
- Views: 7638
- Wed Mar 23, 2005 10:59 am
- Forum: Software
- Topic: problems with hangs...
- Replies: 3
- Views: 7638
problems with hangs...
so how do i fix it? i have a 2x433 cel on bp6 unmodded board...big cooler on procs, and one on the chipset...RV BIOS and 1.28 HPT bios with 1.25.0.10 driver for HPT366... after installing windows XP pro SP2, it just works great...formats the drive, copies the files...and then it just hangs in config...
- Wed Mar 23, 2005 10:46 am
- Forum: Software
- Topic: Windows XP install hangs
- Replies: 7
- Views: 6729
- Mon Mar 21, 2005 1:27 pm
- Forum: Cases / Other Mods
- Topic: Best cooler...
- Replies: 0
- Views: 12955
Best cooler...
for me it's a CoolerMaster HSC-V62 cooler with TC!
)
fits like a glove on a BP6!
![Smile :)](./images/smilies/icon_smile.gif)
fits like a glove on a BP6!
- Mon Mar 21, 2005 1:23 pm
- Forum: Overclocking / CPU Database
- Topic: Post your overclocking results!
- Replies: 26
- Views: 60883
my 533's run fairly happily at 600 / 75fsb I've had them up to 624 / 78fsb but i haven't cooled the BX as yet. must get around to that. Pretty good. I could also run mine at 600MHz but as you can see from the performance tests I made, 600 provided almost nothing over 576 (75MHz vs 72MHz FSB). My ma...
- Mon Mar 21, 2005 1:20 pm
- Forum: Overclocking / CPU Database
- Topic: Bp6 un-modded limit
- Replies: 36
- Views: 48294
Just a little "teaser", if you will. 433's have a clock multiplier of 6.5, the "best" that the BP6 will do, stable, is 110 mhz fsb. So, this gives us a "possible" 6.5 X 110 = 721.666. OBTW, this has been done with "active" cooling, large heat sinks, Peltiers, water bolcks, etc. I am in the process ...
- Sun Mar 20, 2005 11:39 am
- Forum: Overclocking / CPU Database
- Topic: cooling the BX chipset - 3-wire fan???
- Replies: 12
- Views: 16853
my bp6's are "MPS Multiprocessor PC" when i tried changing them to ACPI in Bios and getting them running as ACPI Multiprocessor, my kernel wouldn't sit idle anymore. Taskinfo showed a big red bar of cpu being used by the kernel for some reason (anyone?) and the only good reason for ACPI is so the c...
- Sun Mar 20, 2005 11:26 am
- Forum: Overclocking / CPU Database
- Topic: Post your overclocking results!
- Replies: 26
- Views: 60883
- Sat Mar 19, 2005 11:37 am
- Forum: Overclocking / CPU Database
- Topic: cooling the BX chipset - 3-wire fan???
- Replies: 12
- Views: 16853
there's a small "'"'gpu type '"'" plastic connector between pci1 and pci2 it's a WOL connector. might be nice if a gpu fan fits and runs though thanks, you seem to know better than some others... so now it's a race to find a WOL fan for the chipset! the problem is that it's 35mm (ISO standard), so ...
- Fri Mar 18, 2005 4:33 am
- Forum: Hardware
- Topic: Video Card for BP6
- Replies: 10
- Views: 27544
Re: Video card
BP6 only supports AGP 1x, so any fance board is useless. I use matrox G 400 millenium. Try to find a secondhand good board and don't pay too much. Luistervink: If you can convince me that there is a tremendous amount of real performance difference between AGP 1x and AGP 8x then I will definitely re...
- Fri Mar 18, 2005 4:09 am
- Forum: Overclocking / CPU Database
- Topic: cooling the BX chipset - 3-wire fan???
- Replies: 12
- Views: 16853
the three wire is for the voltage, + and - and the speed sensor. the third fan header on the bp6 doesn't have the speed sensor enabled through to the sensor chip reading thingy. it saves on one of the hdd fan voltage adaptor plugs better yet...i've got a 1 fan on case, connected on the FAN1, then C...
- Fri Mar 18, 2005 3:55 am
- Forum: Overclocking / CPU Database
- Topic: Post your overclocking results!
- Replies: 26
- Views: 60883
- Fri Mar 18, 2005 2:57 am
- Forum: Overclocking / CPU Database
- Topic: dual 433@488MHz/128kB/75MHz/2.0V, can it be more overclocked
- Replies: 4
- Views: 9145
dual 433@488MHz/128kB/75MHz/2.0V, can it be more overclocked
so please tell me how to make it run on higher frequences? does the volatge go down or up when i sellect more speed in FSB? is there some other BIOS tip you can help me with?
running a BP6 with RU version of BIOS, and WinXP Pro!
:)
running a BP6 with RU version of BIOS, and WinXP Pro!
:)
- Sun Mar 13, 2005 9:51 am
- Forum: Overclocking / CPU Database
- Topic: Bp6 un-modded limit
- Replies: 36
- Views: 48294
Again, could you supply a link to what you are referring to? It makes these things much easier to examine. here is the link: http://www2.abit.com.tw/page/en/download/download_detail.php?pFILE_TYPE=Bios&pMAIN_TYPE=Multimedia&pTITLE_ON_SCREEN=HotRod+66+%2F+HPT366&pSOCKET_TYPE=Others and this is what ...
- Sat Mar 12, 2005 2:58 pm
- Forum: Overclocking / CPU Database
- Topic: Bp6 un-modded limit
- Replies: 36
- Views: 48294
and on ABIT pages there is only HPT366 BIOS (individual) for 1.25 version. Again, could you supply a link to what you are referring to? It makes these things much easier to examine. here is the link: http://www2.abit.com.tw/page/en/download/download_detail.php?pFILE_TYPE=Bios&pMAIN_TYPE=Multimedia&...
- Sat Mar 12, 2005 2:23 pm
- Forum: Overclocking / CPU Database
- Topic: Bp6 un-modded limit
- Replies: 36
- Views: 48294
The HPT BIOS is included with the motherboard BIOS, so you wouldn't be able to use the BP6 version on your BE6. Maybe someone has modified the BE6 BIOS to update the HPT? i know that...but with TH BIOS for BE6 i got 1.25 HPT366! and on ABIT pages there is only HPT366 BIOS (individual) for 1.25 vers...
- Sat Mar 12, 2005 1:20 pm
- Forum: Overclocking / CPU Database
- Topic: Bp6 un-modded limit
- Replies: 36
- Views: 48294
the question is, WHAT CPU's GOES ON THAT MOTHERBOARD WITHOUT MODDING IT!? Hi Klik and welcome to BP6.com. The top Celerons that you can run on the BP6 are a pair of 533MHz Celerons. There is plenty of information available on this topic here in the forums if you search (like here in the BP6 FAQ ) a...
- Sat Mar 12, 2005 11:13 am
- Forum: Overclocking / CPU Database
- Topic: What is the difference between there CPU designs?
- Replies: 8
- Views: 13474
P3 are FCPGA and tualatin core are FCPGA-2 No you cannot use P3 without mods on this board. You may use Powerleap Neo S370 adapter for coppermine P3, though for using in dual mode, you need to mod the board ant the adapters. there are lots of info on that in the forums on this site. and what are th...
- Sat Mar 12, 2005 8:12 am
- Forum: Overclocking / CPU Database
- Topic: What is the difference between there CPU designs?
- Replies: 8
- Views: 13474
What is the difference between there CPU designs?
on intel site i saw "PPGA" for celerons which goes on BP6 motherboard...and in some later cases there were "370 Socket PPGA" procesors as celerons and P3...do those go on BP6 motherboard?
can it be done without modds, after all it is the PPGA design...or am i wrong?!
![Smile :)](./images/smilies/icon_smile.gif)
can it be done without modds, after all it is the PPGA design...or am i wrong?!
![Smile :)](./images/smilies/icon_smile.gif)
- Sat Mar 12, 2005 7:45 am
- Forum: Overclocking / CPU Database
- Topic: Bp6 un-modded limit
- Replies: 36
- Views: 48294
First you need to get your hands on a couple of NEO370´s which isn't easy these days or so I've heard. Second you have to break a single copper thread in the NEO's and solder two pins on the ZIF sockets together. On top of that you need to replace capacitor EC10 and make sure that no caps are messe...