cpu #2 fan header blew - how to fix?
cpu #2 fan header blew - how to fix?
i have a multimeter and generally know how to use it. any help would be appreciated. it just doesn't work. i can take the fan for cpu#2 and put it over on the header for cpu#1 and it works fine. right now i have an extention i made from another fan going down to the case fan header at the bottom of the board. that heade is lame though cause it doesn't monitor rpm's.
- m0gely
http://quake2.telestream.com/
q2 | q3 | counter-strike
-=[ BP6|366's@550@1.95v|512M|30G RAID0|TNT2u|SBLive|Win2K3 ]=-
http://quake2.telestream.com/
q2 | q3 | counter-strike
-=[ BP6|366's@550@1.95v|512M|30G RAID0|TNT2u|SBLive|Win2K3 ]=-
I think you should just be able to run a link wire across under the board from +12v on the powersupply connector to the positive pin of the fan header.... check continuity from a working fan header across and it will point you in the right direction. Will confirm it in a few days while I am doing the capacitors in my BP.