Thats another reason Intel should be nuked........................
I hate them buggers...............AHHHHHHHHHHHHHHHH!!!!!!!!!!!!!!
The more I think about it the madder I get.........
NEW CELERON 1100A/256/1.475 Can it work with a NEO?
GILLman,
You said you have a NEO adapter - but, is it the original Neo370, or is it the new Neo370T? Your Cele3-1100/256K chip uses the Neo-370/T
The PIII-1100E/256/100FSB CPU works fine - but only with the Neo370.
Forget the Tualatin core CELE3s & P3s - even with the new Neo, it's no go.
If you want to get the P-III/1100E going:
-place single CPU/Neo370 in socket 370 toward front of PC
- (you did) update your BIOS to RU 1.251 with P3 microcode or later
-set the system FSB to 100MHZ
-set the voltage to 1.75
-get a serious cooler: EverCool 715 or 725 copper w/70mm fan<$20
(powerleap's is barely adequate) +Artic silver + copper shim.
visit nexfan.com for good prices
-get the win2K or winXP driver for HPT366 (better to get Promise card)
(my WinXp BP6 booted, but was not stable running from the HPT366)
Good Luck!
You said you have a NEO adapter - but, is it the original Neo370, or is it the new Neo370T? Your Cele3-1100/256K chip uses the Neo-370/T
The PIII-1100E/256/100FSB CPU works fine - but only with the Neo370.
Forget the Tualatin core CELE3s & P3s - even with the new Neo, it's no go.
If you want to get the P-III/1100E going:
-place single CPU/Neo370 in socket 370 toward front of PC
- (you did) update your BIOS to RU 1.251 with P3 microcode or later
-set the system FSB to 100MHZ
-set the voltage to 1.75
-get a serious cooler: EverCool 715 or 725 copper w/70mm fan<$20
(powerleap's is barely adequate) +Artic silver + copper shim.
visit nexfan.com for good prices
-get the win2K or winXP driver for HPT366 (better to get Promise card)
(my WinXp BP6 booted, but was not stable running from the HPT366)
Good Luck!