Vuke69 wrote:Just in case anyone cares (probably not though) I was just looking at some of the numbers for the last month and they are as follows
# of logins to the ftp server: 21,472
# of completed downloads: 249
Upstream bandwidth usage just for completed d/l: 79,680 MB or 77.8125 GB
Since there have been several thousand incomplete downloads I'm sure I used a whole lot more bandwith than that, I would guess at least twice that amoun, but I really have no way to tellt. I'm just supprised that they havent snipped my connection yet
While were on the topic of useless statistics, my MySQL Server has been hit with 557837 queries as well.
I have discovered why I get corrupt cue sheet with Nero........
I had to changed it.......
From:
FILE "lindowsos-3.0.0-winbeta.bin" BINARY
TRACK 01 MODE1/2352
INDEX 01 00:00:00
To:
FILE "lindowsos-3.0.0.bin" BINARY
TRACK 01 MODE1/2352
INDEX 01 00:00:00
Perhaps this was a cruel joke played on Slagathor....Hmmmmm
What do you guys use to make the CD?????
I tryed Nero, I have EZCD Creator around here some where.......
Heres the log from Nero:
Joy
15067-65762-47654-69896-4245
Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.45, size=172099 bytes, created 12/21/2002 2:04:27 PM
Nero Version: 5.5.8.0
Recorder: <PHILIPS PCRW1208> Version: P3.1 - HA 1 TA 0 - 5.5.8.0
Adapter driver: <atapi> HA 1
Drive buffer : 4096kB
Bus Type : default (0) -> ATAPI
CD-ROM: <PHILIPS PCRW1208> Version: P3.1 - HA 1 TA 0 - 5.5.8.0
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC AC26400B atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC AC21200H atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PHILIPS PCRW1208 atapi Port 1 ID 0 DMA: On
=======================
AutoRun : 0
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261680kB)
Free physical memory: 91MB (94180kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: Off
CueSheet
12.3.2003
5:11:56 PM #1 Phase 87 File dlgbrnst.cpp, Line 1449
Seamless Link activated
5:11:56 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
5:11:56 PM #3 Text 0 File Writer.cpp, Line 129
Writer PHILIPS PCRW1208 running
5:11:56 PM #4 Text 0 File Burncd.cpp, Line 2636
Turn on Track-At-Once, using CD-R/RW media
5:11:56 PM #5 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (original item values)
0: TRM_DATA_RAW_MODE1 (Cue Sheet Track)
2 indices, index0 (150) provided
original CD pos #0 + 203648 (203648) = #203648/45:15.23
relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------
5:11:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 199
Last possible write address on media: 337349 (74:59.74)
Last address to be written: 203647 (45:17.22)
5:11:59 PM #7 Text 0 File DlgWaitCD.cpp, Line 1387
Recorder: PHILIPS PCRW1208;
CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D1 40 C4, 2: 61 1A 41 (LI 97:26.65), 3: 4B 00 00 (LO 75:00.00)
Additional Info [hex] 1: 11 5C B0, 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
5:11:59 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 834
Prepare recorder PHILIPS PCRW1208 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 417378304
5:11:59 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 862
Removed 2 run-out blocks from end of track 1.
5:11:59 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE1 (Cue Sheet Track)
2 indices, index0 (150) provided
original CD pos #0 + 203648 (203648) = #203648/45:15.23
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 203646 blocks [PHILIPS PCRW1208 ]
--------------------------------------------------------------
5:11:59 PM #11 Phase 36 File dlgbrnst.cpp, Line 1449
Burn process started at 2x (300 KB/s)
5:11:59 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1960
Verifying CD position of item 0 (relocatable, no CD pos, no patch infos, orig at #0): write at #0
5:11:59 PM #13 Text 0 File Mmc.cpp, Line 15361
Set BUFE: Seamless Link -> ON
I have never had a problem buring ISO's.....
It is an EIDE Philips.
I use 1x or 2x when I am having problems with the burning, that usually helps, but not this time....heh
Slagathor wrote:I have never had a problem buring ISO's.....
It is an EIDE Philips.
I use 1x or 2x when I am having problems with the burning, that usually helps, but not this time....heh
I just tryed it again for the hell of it, and wouldn't ya know it.........
Damn thing went.......heh
I have no clue, sometimes these things just drive me insane
I haven't had a lot of time to "play" with FreeSpire yet, however, I did reload it again (just running it from the CD-ROM at this time) and with a little nosing around I found out that it did identify ALL PCI cards in my new box correctly!
1. PNY GeForce FX5500 128meg, dual head vid card
2. Chaintech 7.1 sound card (surround sound even works with no set-up!)
3. ADAPTEC SCSII AND Microtek X6EL scanner
4. WinTV GO! analog vidoe capture card
5. SIIG multi-function card (FireWire, USB, ATA100, RAID)
6. Both CD/DVD 'burners!
7. My HP HP5L and Canon i900D printers!
8. My DATA USB modem
Of course this doesn't mean that I'll find drivers for all of this but so far things are looking up!
It also "sees" all partitions (FAT32 & NTFS), drives and folders.
I just have to figure out how to make things work, I know NOTHING about Linux. This is supposed to be an OS for people who just want their PC to "WORK", not for them to become "experts" in LINUX.
We shall see !
The next thing on my "adgenda" is to get both monitors functioning!