I'm FINALLY finished with overclocking! It's all done.
Everything i wanted to do i have done.
So, my final results and things i did to get there:
Both CPU's are Celeron 400MHz, 66MHz FSB. 2.00Volt default
Now they are 600MHz, 100MHz FSB, 2.2volts
CPU Temp readings are 23 degrees C idle, upwards of 30 in use.
Case temp is usually 27 idle, 35+ in heavy use.
Also note - I looked and my sensor diodes are not close to the CPUs, they are bent all the way downwards. Thus, i guess temps are really a few degrees higher, but I'm not certain.
Everything inside the case is pristinely cleaned (compressed air on everything today)
I've added Pentium heatsinks to my Chipset and video card because they were overheating before. Now they are not. See my picture album thing for more on those.
Finally, I'm also using a new(ish) network card and sound card, because FSB's between 75-90 burned out the other ones. The old Sound card is toast (it gets detected with no troubles, but sound output is little pops) And my old network card works tolerably, but randomly stops working for no reason and is therefore, not worth using.
Thanks to Smitty! I got this board in a machine he gave me. ITS GREAT YAY!
That's about it! I had to let the world know of my success.
My ordeal is at long last OVER!!
My ordeal is at long last OVER!!
The collector of the old and unwanted.
thats awesome dude... i love the temps
!!! WARNING !!!
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
The following forums: www.bp6.com
are infected with the following VIRUS(s): Kuun.infected.all.posts.Win2K.user
The following IRC servers has been exploited: irc.bp6.com
with the Following Exploit: Kuun.lurks.using.mIRC.v5.82.exploit
Re: My ordeal is at long last OVER!!
Jordan wrote: Also note - I looked and my sensor diodes are not close to the CPUs, they are bent all the way downwards. Thus, i guess temps are really a few degrees higher, but I'm not certain.
Dual Barton Mobile 1.8ghz
Venice 3000+ @ 2.6ghz
lots of BP6s and two VP6s all apart currently
Venice 3000+ @ 2.6ghz
lots of BP6s and two VP6s all apart currently
Jordan wrote:I have 6 fans, and i have massive Alpha CPU heatsinks pasted with arctic silver 5. My case moves air like a furnace! Also, my BP6 lives in my basement computer room which is abnormally cold.
than the basement must be it...'cause mine are about 40-50°C in my room...of course, they are computing on grid.org!