BIOS version: RV Without HPT
Distro: Debian RC3 (net install)
fsck.ext3: No such device or address while trying to open /dev/hdg1
Possibly non-existent or swap device?
fsck failed. Please repair manually.
I get the above error during boot. The drive in question is a 200GB Seagate Barracuda attached to a Highpoint Rocket133SB (hpt302), residing in PCI-slot 2. System itself is installed on a U160 SCSI drive attached to an Adaptec 29160N, residing in PCI-slot 3. No other disk controllers are being used.
Corresponding line in /etc/fstab:
/dev/hdg1 /home/public ext3 defaults 0 2
What's weird is I can (manually) mount the drive just fine once the system's all booted up. I've tried different 2.4.x and 2.6.x kernels, all with the same result. Knoppix on the other hand, can find and mount the drive during boot with no bitching or moaning whatsoever. Only difference I'm aware of is that Knoppix appears to be loading the ataraid module rather than the hpt366 one. Any ideas, anyone?
Btw, I'm new to the forum ('sup guys) and relatively new to Linux, so any help I can get would be most appreciated. Thanks.