BP6.Com

by **onelegdis** » Tue Apr 08, 2003 12:11 pm

ATI Xpert 2000
Hercules GF2 GTS 32Meg
Chaintech GF3 500ti

No problems with any of these on my BP6.

by **johnli** » Tue Apr 08, 2003 4:51 pm

Creative 3D Blaster Voodoo Banshee
Asus V6800 Geforce 256 DDR Deluxe
both working well for a lovely dual monitor setup.

by **loophole** » Tue Apr 08, 2003 8:14 pm

I've run all of the following AGP cards successfully without any problems in my BP6:

Matrox Millennium G400 32MB DualHead AGP;
Leadtek Winfast GeForce 256 SDR (32MB);

The BP6 AGP's voltage is derived from the 5V rail (as in a voltage divider circuit using the 5V to get 3.3V) as opposed to actually running the AGP with 5V, so the voltage is 3.3V and should infact be better than taking the 3.3V directly from the 3.3V rail.

by **hyperspace** » Wed Apr 09, 2003 5:59 am

I have used these graphics cards in my BP6's.

Diamond Viper V770 Ultra TNT2 32MB AGP 4X/2X
LeadTek Winfast Geforce2 MX 400 32MB AGP 4X/2X
eVGA e-Geforce4 440MX 64MB DDR AGP 4X/2X

by **InactiveX** » Wed Apr 09, 2003 9:50 am

Creative Riva TNT2Ultra AGP 32MB.

Has always worked great with my BP6, AGPx2, and have run it at up to 83MHz.

by **Derek** » Wed Apr 09, 2003 1:23 pm

Right now an ATI AIW Rage128 is in my BP6 server.

by **genseng** » Fri Apr 11, 2003 12:03 am

ATI 8500LE 64MB
Diamond Vipper V770 32MB

*also used a creative banshee but haven't tested it on a stable system (not that the instability of the system - that board has some problems

*

update: creative banshee (3dfx) 16MB card works.

by **nullshark** » Fri Apr 11, 2003 9:16 pm

ATI 8500LE (Retail)
3DFX Voodoo3 3500
Diamond 3D 2000 Pro (S3 Virge 325 chipset)

All work fine together in XP (as long as I initialize the Diamond first)

by **johnli** » Sun Apr 13, 2003 4:47 am

To anyone running both an AGP and a PCI card, which do you initialize first? I've run in to problems with initialising AGP first with my Geforce and Banshee.

by **nullshark** » Sun Apr 13, 2003 10:34 pm

I've run multiple vid cards in the BP6 since I got it. The only time I had to init the PCI first was when an older PCI video card was in the mix.

GeForce2 MX AGP + old S3 Virge - AGP 1st, didn't work. Had to init PCI 1st

GeForce2 MX AGP + Voodoo3 2000 - AGP 1st, works fine

GeForce2 MX AGP + Voodoo3 3500 - AGP 1st, works fine

ATI 8500 LE AGP + V3 3500 - AGP 1st works fine

ATI 8500 LE AGP + V3 3500 + old S3 Virge - Have to init PCI 1st

All that said, no matter which card initialized first, you can still designate whichever card you want as the primary display device, once you get into Windows.

by **Wolfram** » Wed Apr 16, 2003 2:31 am

Matrox G100 8MB AGP
Matrox G400 16 MB SH AGP
Matrox G450 16 MB DH AGP
Hercules 3D Prophet 2MX (Geforce F2MX) 32 MB AGP

Not too exciting, I´m afraid. I´d love to poke around with a second video card, but I have no free PCI slot left...

by **Slagathor** » Wed Apr 16, 2003 9:43 pm

I have used in a BP6:

GeForce 2 MX200 32meg (Creative)
GeForce 2 Ultra 64meg (Creative)
TnT2 Ultra 32meg (Creative)
Voodoo 3 2000 PCI 16meg (3DFX)
GeForce 4 Ti 4200 128 meg (Palit)(currently in my KX7)
Voodoo Rush 8meg (SIIG)
Voodoo Rush 6meg (Hercules)
Voodoo Banshee 16meg (Creative)

by **Jui** » Mon May 19, 2003 4:15 am

I'm useing:
Sapphire radeon 9000 Atlantis pro 128MB

by **iSDn** » Mon May 19, 2003 12:48 pm

Hi!
I'm using MSI Geforce4 TI4400VIVO. It runs perfect.

by **kuun** » Mon May 19, 2003 2:17 pm

i gots a PNY Gefore2 200MX 32mb pci
also used an old ATI 3d rage pro 8mb

no problems so far (except in quake2 (buggy dos games))

by **the_flames** » Wed May 21, 2003 8:41 pm

I'm using a
Voodoo 3 3000 pci (2k default drivers)
and a
Geforce 2 MX/MX400 AGP - modded nvidia drivers in agp1 mode

and it works quite nicly for games

by **HAL6000** » Sat Jun 07, 2003 10:42 am

32MB ATI Raedon All In Wonder
32MB Diamond Viper v770 Ultra
16MB GF2 MX (In the laptrop)
16MB Trident card of somekind

by **RRLedford** » Sat Jun 21, 2003 4:52 pm

In my (3) BP6 systems I've had TNT2-Ultra 32MB, Geforce2 MX200 & MX400 both 64MB, Geforce2-Personal Cinema 64MB with TV tuner, and I am about to try a Geforce FX5200 64MB tomorrow.
Anyone know if the Geforce FX is likely to give trouble?

by **hyperspace** » Sun Jun 22, 2003 5:34 am

RRLedford wrote: ...and I am about to try a Geforce FX5200 64MB tomorrow. Anyone know if the Geforce FX is likely to give trouble?

I think you might be the first. Keep us posted. :wink:

by **RRLedford** » Mon Jun 23, 2003 7:59 am

Actually, it's a 128MB card & they have dropped in price to below $70 on the Web. Mine is an ABIT Siluro with a cool looking (finger burning) heatsink of extruded aluminum in the shape of the ABIT letters. The appeal of a no-fan Geforce FX suckered me to this model & now I'm working on a fan retrofit!

BP6.Com

What Video card are you using?

What Video card are you using?

Who is online