ECS D6VAA, Pentium 3 1.4, Lin Lin 370 Tualatin Converter?

onelegdis · Post by **onelegdis** » Thu Sep 25, 2003 6:31 am

Just got hold of a P3 1.4S. I want to try it out on my D6VAA first and then play around with it on the BP6. Does the Lin Lin adaptor support P3 Tualatins or just Celerons Tualatins? Is there a difference with the pin outs/voltages etc?

Post by **Derek** » Thu Sep 25, 2003 9:03 pm

There is no diff., so it should work.

onelegdis · Post by **onelegdis** » Fri Sep 26, 2003 7:26 am

I thought so, just needed to hear it from someone else

. I just dont want to blow this P3 up

Ill let you know how it goes

onelegdis · Post by **onelegdis** » Fri Sep 26, 2003 8:36 am

I love it when a plan comes together

Success, 1.4 P3s (single)with adapter, up and running. Removed jumper B8+B9 on the Lin Lin (stupid name) to give me 133 FSB and bingo. Now to get it to run dual. Need another P3 and adapter.
Ill try and post some pictures this weekend after some stress testing.

Post by **Derek** » Fri Sep 26, 2003 8:44 am

onelegdis wrote:I love it when a plan comes together Success, 1.4 P3s (single)with adapter, up and running. Removed jumper B8+B9 on the Lin Lin (stupid name) to give me 133 FSB and bingo. Now to get it to run dual. Need another P3 and adapter.
Ill try and post some pictures this weekend after some stress testing.

Sweet!!

24seven · Post by **24seven** » Fri Sep 26, 2003 9:40 am

How much are the cpus and adapters costing you?

If you can get them to run dual in the D6VAA I may do the same. My P3 700's are getting a little slow, even though they are running at 8**Mhz (cant remember the speed exactly).

onelegdis · Post by **onelegdis** » Fri Sep 26, 2003 11:19 am

24seven wrote:How much are the cpus and adapters costing you?

If you can get them to run dual in the D6VAA I may do the same. My P3 700's are getting a little slow, even though they are running at 8**Mhz (cant remember the speed exactly).

Hi 24seven, got the P3 for £85 and the adapter for £10. Both on Ebay. I might be interested in selling the two P3 1Gig Coppermines i pulled from the D6VAA if your interested, but i want to see how stable the 1.4s is first.

24seven · Post by **24seven** » Fri Sep 26, 2003 11:48 am

Yeah I would be very intrested if they are for a reasonable price, so yeah, please keep me informed.

onelegdis · Post by **onelegdis** » Fri Sep 26, 2003 2:29 pm

onelegdis · Post by **onelegdis** » Fri Sep 26, 2003 9:00 pm

onelegdis · Post by **onelegdis** » Fri Sep 26, 2003 9:04 pm

kuun · Post by **kuun** » Sat Sep 27, 2003 8:14 pm

SWEET!!!

hyperspace · Post by **hyperspace** » Sun Sep 28, 2003 8:22 am

Will be interesting to see if a second processor/adapter will work in dual mode.

kuun · Post by **kuun** » Sun Sep 28, 2003 4:05 pm

i wanna do a dual p3 mod on my second bp6 as soon as i get caps for it

onelegdis · Post by **onelegdis** » Wed Oct 01, 2003 8:20 am

Stable at 1533 with 146 FSB

. Ran Sandra burn in 50 times and been playing MOHAA Breakthrough for two days! Locks up if i go any higher, so i might pull some pci cards out to see if there holding me back.

kuun · Post by **kuun** » Sat Oct 04, 2003 10:59 am

pci cards prevent overclocking?

dude...

onelegdis · Post by **onelegdis** » Sun Oct 05, 2003 4:26 pm

OK, slight problem........it decided to reboot on friday and then would'nt post!!!!.......thought id fried the CPU! Pulled all the cards and drives and still no post! Put a P3 Coppermine back in and still jack s**t....what the F***......Pulled the memory and stuck 256mb from the BP6 in there and.......post...bingo. Say good bye to 2 sticks of Crucial 256mb PC133

Looks like that 160mhz FSB done some serious damage! Need to track down some Mushkin 150!

Post by **Derek** » Sun Oct 05, 2003 4:30 pm

onelegdis wrote:OK, slight problem........it decided to reboot on friday and then would'nt post!!!!.......thought id fried the CPU! Pulled all the cards and drives and still no post! Put a P3 Coppermine back in and still jack s**t....what the F***......Pulled the memory and stuck 256mb from the BP6 in there and.......post...bingo. Say good bye to 2 sticks of Crucial 256mb PC133 Looks like that 160mhz FSB done some serious damage! Need to track down some Mushkin 150!

Ouch! Did the sticks have heatsinks on them?

24seven · Post by **24seven** » Sun Oct 05, 2003 4:34 pm

Dude... mine did the same yesturday morning!!! DV6AA as well, but unlike yours it was the Board and not the RAM!

Little annoyed!!

onelegdis · Post by **onelegdis** » Sun Oct 05, 2003 5:05 pm

Derek...No, never needed it with Crucial before..no way of monitoring the temp anyway...may be a future project for BP6.com!!!!!!!!!

24seven...how do you know its the board!

....We now have a user group of 2!!!!!!!

I might be able to help......give me some info?

24seven · Post by **24seven** » Sun Oct 05, 2003 6:10 pm

erm.. info.. every thing from the board works in another board...! explain that heh

I was in windows... and it just crashed and then just wouldnt post
just did nothing..became the first dual cpu paper weight.

onelegdis · Post by **onelegdis** » Sun Oct 05, 2003 6:23 pm

Any bulging/leaking caps!!!!..........what were you doing when it blew?

24seven · Post by **24seven** » Mon Oct 06, 2003 3:52 am

Erm yeah there are 2 on VRM that are bulging and leaking a very small amount. I was just opening IE and it died!

Post by **Derek** » Mon Oct 06, 2003 8:42 am

24seven wrote:Erm yeah there are 2 on VRM that are bulging and leaking a very small amount. I was just opening IE and it died!

IE killed your machine!

kuun · Post by **kuun** » Tue Oct 07, 2003 12:15 am

SUE MICROSOFT!!!!