I'm having a pretty strange problem with my BP6. I just got an AVerMedia M150 card (for XP Media Center) and it doesn't seem to be working in my system. It doesn't show up in the list generated by the BIOS (after the highpoint screen) and windows doesn't detect it. The card is detected in another system, which happens to also be on an ABIT motherboard.
I've tried removing everything but the M150 card and the graphics card. I've tried two different graphics cards, though they were both AGP. I've tried at least 4 of the 5 PCI slots. The BIOS version is RU. The slots i've tried definitely work.
Any suggestions are appreciated!
BP6 problems - PCI card not working
The only thing I can suggest off the top of my head is to try the following.
Put the card in the machine, with just a graphics card.
Switch the machine on.
Shut it down, and unplug the power cable, then press the on button, it should quickly come on and go off again.
Plug it back in and see if it is detected then.
This normaly works when machines stop seeing USB devices etc, so might work with a pci card.
Put the card in the machine, with just a graphics card.
Switch the machine on.
Shut it down, and unplug the power cable, then press the on button, it should quickly come on and go off again.
Plug it back in and see if it is detected then.
This normaly works when machines stop seeing USB devices etc, so might work with a pci card.
i'll make sure that i do all 5 slots right now, it was like 4AM when i was working on this heh...
the card is a TV capture & FM radio card... hardware MPEG-2 encoding.
used with XP Media Center
http://www.microsoft.com/windowsxp/mediacenter i think is the link.
the card is a TV capture & FM radio card... hardware MPEG-2 encoding.
used with XP Media Center
http://www.microsoft.com/windowsxp/mediacenter i think is the link.